CABLES & ACCESSORIES
Click to enlarge imageRJ45 CONNECTOR FOR 2 DATA STREAMS RJ45 DUPLEX ADAPTOR WITH CABLE 1M-2F (Allows one RJ45 calbe to run 2 streams of network triffic $15.00
Click to enlarge imageRJ45 LINE COUPLER $8.00
Click to enlarge imageSATA CABLE SET WITH POWER PLUG $5.00
Click to enlarge imageSATA PCI CONTROLLER CARD DESCRIPTION?/font>
PCI 1 external & 1 internal Serial ATA Raid 0/1 Card
Chip: Silicon Image Sil312a
Type: PCI Bus Burst Mode up to 266MB/S
Speed: Serial ATA Rate up to 1.5Gb/s
Channel: Provides dual Serial ATA channels
Function: Co-resides with Motherboard IDE devices
Support: Up to Hard Drives over 137GB
Features: ROM BIOS supports Boot Features
Compliant: Serial ATA Specifications 1.0
Connector: External x 1 and Inside X 1
Other: Bundle drivers to maximize performance
O.S. : Windows 98SE/ME/NT4.0/2000/XP and Linux
Click to enlarge imageSECONDARY POWER SUPPLY CONTROL RC-ATXPS
Allows one ATX/M-ATX power supply to control the On/Off function of an additional ATX/M-ATX power supply.
The RC-ATXPS cable connects to a molex connector of the primary power supply to the ATX motherboard connector of the secondary power supply. This allows the secondary power supply to power additional devices such as HDDs and CD-ROMs etc.
?ow to use:
Switch off the power supply to your PC system, including the On/Off switch of power supply (If applicable).
Connect the RC-ATXPS? 4-pin connector to one of the primary power supply? 4-pin molex connectors.
Connect the RC-ATXPS? 20-pin connector to the secondary power supply? 20-pin ATX power connector.
Connect additional devices to the secondary power supply? connectors etc.
Connect power to both power supplies and switch on. Both power supplies should now switch on and off together using the PC? power switch/button.
Click to enlarge imageSERIAL TO IDE ADAPER You have a Serial ATA device you wish to convert to IDE. Marvell 88i8030. Supports Host to Serial ATA Interface. Support Bus Master/Slave. Single/dual port enable/disable. Supports 2 channel and 2 devices. Dual channel ATA IDE port to Serial ATA bridge . Supports the Serial ATA transfer rate of 150mbs with its onboard serializer/deserializer and is compatible with Ultra ATA/133. Supports plug-and-play & hot swapping. Supports PC systems
Click to enlarge imageUSB BLUETOOTH DONGLE $20.00
Click to enlarge imageUSB DUAL SHOCK GAME PAD $35.00
Click to enlarge imageUSB SLIMLINE FLOPPY DRIVE $35.00